Microprocessor control guarantees high reliability

  Equipped with Boost and Buck AVR to stabilize input voltage

  Built-in DC start function enables UPS to be started up without AC power supplied.

  Smart RS-232 Communication Port with Free Download Software from the Internet.

  User-Replaceable Battery Design.

  Both Auto charge even though UPS is off.

  Green Power Function for energy saving.

  Auto restart while AC recovery.

  4 Provides Modem/Phoneline Surge Protection.

  4 USB Option.

MODEL		Blazer 1000	Blazer 1400					Blazer 2000
CAPACITY	VA/W	1000VA/600W	1400VA/840W					2000VA/1080W
INPUT	Voltage	115VAC or 220/230/240VAC
	Voltage Range	90-140VAC / 158-290VAC
OUTPUT	Voltage	115VAC or 220/230/240VAC
	Voltage Regulation(Batt. Mode)	±10%
	Frequency	50Hz or 60Hz
	Frequency Regulation (Batt. Mode)	+/-1 Hz
	Output Waveform	Modified Sinewave
TRANSFER TIME	Typical	4-6ms
BATTERY	Battery Type & Number	12V/7AH x 2pcs		12V/9AH x 2pc
	Back up Time (at a PC load with 15" monitor)	23 minutes		25 minutes		26 minutes
	Recharge Time	8 hours to 90% after complete discharge
DISPLAY	LED	Power on, Backup Mode
INDICATOR	AC Mode	The 1st green LED lighting The 2nd to 5th green LEDs gradually lighting indicating load level
	Battery Mode	The 1st green LED flashing The 2nd to 5th green gradually lighting indicating battery capacity
	Fault	Red LED lighting
AUIBLE ALARM	Battery Mode	Sounding every 10 seconds
	Low Battery	Sounding Every Second
	Overload	Sounding every 0.5 second
	Battery Replacement	Sounding every 2 seconds
	Fault	Continuously Sounding
PROTECTION	Full Protection	Discharge, overcharge, and overload protection
PHYSICAL	Dimension DxWxH(mm)	368.3X140.2X180.4
	Net Weight (kgs)	13.8			14.2		16
ENVIRONMENT	Operating Environment	0- 40°C, 0-90 % relative humidity (non-condensing)
	Noise Level	AC Mode: Less than 40dB Backup Mode: Less than 45dB
INTERFACE	Smart RS-232	Windows 95/98/NT/2000/ME/XP, Novell, and Linux